Woodpeckers 6-lN-1 Gauges give you a physical reference for measurements toeliminate the errors that can crop up when reading scales. With a series of shoulders,pins and stops, you have several different ways to physically reference a set dimension.This handy device comes in two different sizes. For pocket-sized convenience, there’sthe 6-in-1 Pocket Gauge and for increased capacity there’s the 6-in-1 Shop Gauge.
Saw Blade & Router Bit Depth of Cut. With the feet on your table surface,the sliding block gives you a physical reference to set your saw blade or router bit.
Dril Bit Stop Collars. Turn the tool over and you’ll see a vee-block, Use that to cradle your drill bits while you set a stop collar.
Marking Gauge. Move the sliding block past the feet and you have a marking gauge. There’s a notch to keep your pencil properly positioned.
Centering Gauge.Put the feet on opposite sides of a board and twist the gauge so both feet are firmly in contact with the board surface. The 1mm hole in the Base will be at the exact center of the board. Put a mechanical penci in the hole and you can slide along the length, scribing the center perfectly.
